Carbon Steel, Zinc Plated

WEDGE
Carbon Steel, Zinc Plated
(Comes Complete with washers and nuts) (Continued on next Page) List Price per 100 Pieces.
Wedge Anchors
Carbon Steel

Description

Length Price Box/Case Quantity Drill Size A: Overall Length B:Max Thick. of Material Fastened C: Thread Length D: Min. Embed. in Concrete Ultimate Pullout Lbs. ultimate Shear* Lbs.
1/4 x 1 3/4 X 100/1000 1/4 1 3/4 3/8 3/4 1 1/8 1,855 1,647
1/4 x 2 1/4 X 100/1000 1/4 2 1/4 7/8 3/4 1 1/8 1,855 1,647
1/4 x 3 X 100/1000 1/4 3 1 5/8 3/4 1 1/8 1,855 1,647
1/4 x 3 1/4 X 100/1000 1/4 3 1/4 1 7/8 3/4 1 1/8 1,855 1,647
3/8 x 2 1/4 X 100/600 3/8 2 1/4 3/8 1 1/8 1 1/2 3,075 3.294
3/8 x 2 3/4 X 100/600 3/8 2 3/4 7/8 1 1/8 1 1/2 3,075 3,2943/8 x 3
3/8 x 5 X 100/600 3/8 3 1 1/8 1 1/8 1 1/2 3,075 3,294
3/8 x 6 1/2 X 100/600 3/8 3 1/2 1 7/8 1 1/8 1 1/2 3,075 3,294
3/8 x 3 3/4 X 100/600 3/8 3 3/4 2 1 1/8 1 1/2 3,075 3,294
3/8 x 5 X 50/300 3/8 5 3 1/8 1 1/8 1 1/2 3,075 3,294
3/8 x 6 1/2 X 50/300 3/8 6 1/2 4 3/8 1 1/8 1 1/2 3,075 3,294
1/2 x 2 3/4 X 50/250 1/2 2 3/4 3/8 1 5/16 2 1/4 4,982 6,243
1/2 x 3 3/4 X 50/250 1/2 3 3/4 1 1/8 1 5/16 2 1/4 4,982 6,243
1/2 x 4 1/4 X 25/150 1/2 4 1/4 1 1/2 1 5/16 2 1/4 4,982 6,243
1/2 x 5 1/2 X 25/150 1/2 5 1/2 2 3/4 1 5/16 2 1/4 4,982 6,243
1/2 x 7 X 25/125 1/2 7 4 1/4 15/16 2 1/4 4,982 6,243
1/2 x 8 1/2 X 25/100 1/2 8 1/2 5 3/4 1 5/16 2 1/4 4,982 6,243
1/2 x 10 X 25/100 1/2 10 7 1/4 1 5/16 2 1/4 4,982 6,243
1/2 x 12 X 25/100 1/2 12 8 3/4 1 5/16 2 1/4 4,982 6,243
5/8 x 3 1/2 X 25/125 5/8 3 1/2 3/8 1 3/4 2 3/4 7,007 8,084
5/8 x 4 1/2 X 25/125 5/8 4 1/2 1 1/8 1 3/4 2 3/4 7,007 8,084
5/8 x 5 X 25/125 5/8 5 1 5/8 1 3/4 2 3/4 7,007 8,084
5/8 x 6 X 25/100 5/8 6 2 5/8 1 3/4 2 3/4 7,007 8,084

Meets or exceeds U.S.  Government G.S.A. Specifications FF-S-325 Group 11, Type 4, Class 1.
*Ultimate load capacity in 4000 PSI concrete. Laboratory test reports available upon request. Safe working loads for static loading should not exceed 25% of ultimate loads.

Description/Application:

The Wedge Anchor is easy to use. Anchor bolt, carbide bit, and hole size are all the same. Heavy-duty and versatile, the Wedge Anchor is non-bottom bearing, so precise hold depth or clean-out is not always required. A one-piece expanding clip assures full expansion for rugged, dependable holding strength. Available in zinc-plated carbon steel, galvanized steel and stainless steel.

(Comes Complete with washers and nuts.)

Note: Not recommended for use in lightweight masonry material such as block or brick. See next page for installation instruction

Additional Sizes & Bulk Quantities Available Upon Request.

Reviews

There are no reviews yet.

Be the first to review “Carbon Steel, Zinc Plated”

Your email address will not be published. Required fields are marked *